How to Build a Quadcopter Drone: Everything you need to know about building your own Quadcopter Drone incorporated with pictures as a complete step-by-step guide.

Author:Russon, Scott [Russon, Scott]
Language: eng
Format: azw3
Published: 2016-03-11T16:00:00+00:00

Once these are plugged into the flight controller, go ahead and plug the other ends into the receiver. Start with the throttle data plug and plug it into the throttle slot on the receiver. The negative (brown) wire should be facing down, the power (red) wire in the middle pin, and the throttle signal (pink) wire in the top slot. Then plug in the next three single data wires in order on the top slots. Yellow in the aileron, green in the elevator, and blue in the rudder.

The last thing to check is if you are using a separate BEC. If you are, then that needs to be plugged into the receiver to power the receiver and flight controller. The negative wire plugs in the bottom, the power wire in the middle, and the signal wire in the top. It does not matter which slot the BEC plugs into. I have my BEC plugged into the AUX slot. If you’re not using a separate BEC, then the Rx and FC are powered by the BEC’s in your ESC’s through the signal wire that plugs into the flight controller.

Download

Copyright Disclaimer:
This site does not store any files on its server. We only index and link to content provided by other sites. Please contact the content providers to delete copyright contents if any and email us, we'll remove relevant links or contents immediately.